Alliance QABP LR242

QABP LR242–LED LIGHTING24 Volt - load resistor. Blister twin pack, 50 watt 24Ω ohmsFEATURES• Designed for late model vehicles that display light failure warning• Draws the same current as a 21 watt globe• IP67 dust & water proofDummy load resistors designed to draw the same current as a 21 watt globe. They can be used on vehicles that have electronic components that are not LED compatible.The Resistor should ALWAYS be wired between the input wires of the lamp, NOT the chassis of the vehicle or trailer! If fitted to the Chassis, a bad earth connection is possible, and can result in problems with the lighting system of the vehicle!INDICATOR CIRCUITIf fitting to the indicator circuit, fit one lead of the resistor to the positive supply side (Yellow wire) and the other lead of the resistor to the negative supply or ground input wire (White).BRAKE CIRCUITIf fitting to the brake circuit, fit one lead of the resistor to the positive supply side (Red Wire) and the other lead of the resistor to the negative supply or ground input wire (White)CORRECT FITTINGTo fit the resistor, use the crimp terminals supplied. Cut the loom and re-connect the cut wires within the supplied crimp terminal with one side of the resistor crimped into that terminal. Repeat the process for the remaining wire and the other end of the resistor. Use the 2 screw down points on the resistor to secure it to a metal chassis.IMPORTANT NOTICEMust be mounted on metal surfaces, the resistor can reach up to 170°C, do not mount the resistor on any surface that can be melted by the heat of the resistor, this includes plastics, hoses or painted surfaces.LED LIGHTINGA range of high performance, reliable LED lighting products made to suit small, medium and large vehicle and trailers. Each product has been specially designed to suit harsh Australian road environments to create a reliable product at a competitive price, allowing you to hit the road with confidence.BENEFITS• Original unique product design• Used in harsh industries including transport, 4x4, marine trailer and Australian defense forces• Quality LEDs and associated components• Products manufactured to exceed ADR/ECE standards• IP67 dust and waterproof on all external automotive applicationsWHAT IS ADR AND ECE?The Australian Design Rules (ADRs) are national standards for vehicle safety, anti-theft and emissions. The ADRs are generally performance based and cover issues such as occupant protection, structures, lighting, noise, engine exhaust emissions, braking and a range of miscellaneous items. They are largely based on and actively harmonized with the United Nations Economic Commission for Europe (ECE) regulations declared by the World Forum for Harmonization of Vehicle Regulations.The ADRs use only the technical requirements of the ECE Regulations; the ECE system of type approval is not used. Instead, the ADRs are administered according to a self-certification system manufacturers do not seek government-sanctioned testing or approval; rather, they certify that their vehicles and regulated vehicle components comply with all applicable provisions of all applicable ADRs in effect on the date of manufacture. Both ADR and ECE approvals are legal for road use in Australia.Specifications and data shown are subject to change with or without prior notice.