Bobcat DROP HAMMER Hammer / Breaker Hydraulic

BOBCAT DROP HAMMER ATTACHMENT DROP HAMMER ATTACHMENT FOR COMPACT TRACK LOADERS AND SKID-STEER LOADERS• Breaks and demolishes concrete • Delivers more than 3,600-foot pounds of impact energy combined with a fast cycle time of 20 blows per minute • Fractures the material below the surface, leaving the surface free of jagged debris • Allows three seconds to reposition and reset the loader between cycles • Generates little vibration or noise compared to standard hydraulic breakers, meaning less wear on the machine and less noise for operator and bystanders TOP TASKSDemolish parking lots, driveways and other large flat concrete slabsHOW IT WORKSThe drop hammer features a chain mechanism with a catch. The catch grabs the weight and raises it up. When the chain rotates over the top, the catch falls and releases the weight, dropping the hammer onto the material to be demolished.FEATURESCUSHIONED SAFETY VALVEUnique in the industry, the cushioned safety valve allows the operator to stop the hammer in mid-stroke and slowly lower it to a resting position, preventing the hammer from falling if the hydraulic flow is shut off. DRIVE MOTORThe chain-drive motor makes quick work of demolishing concrete surfaces. EFFECTIVE BREAKING POWERDelivering more than 3,600-foot pounds of impact energy for quick and efficient demolishing action. The drop hammer features a 38-inch stroke and a hammer weight of 1,165 pounds. FAST CYCLE TIMEThe drop hammer delivers a fast cycle time of 20 blows per minute with three seconds between cycles to reposition and reset the loader. CONVENIENT STORAGE AND TRANSPORTWhen not in use, the hammer stands upright. Also, stores and transports in the upright position. LOCKING MECHANISMThe locking mechanism prevents the weight from sliding out the top of the hammer during transport. BOB-TACH™ MOUNTING SYSTEMThe Bob-Tach™ Mounting System makes easy work of attaching and detaching the drop hammer from the loader. Fast and easy mounting means spending less time on attachment changes and more time on the job. ADDITIONAL DETAILSTo efficiently break up concrete, the drop hammer delivers over 3,600 foot pounds of impact energy combined with a fast cycle time of 20 blows per minute. Upon impact, the drop hammer fractures the material below the surface, leaving the surface free of jagged debris. Between cycles, the drop hammer attachment allows three seconds to reposition and reset the loader. When the attachment is not in use, the hammer stands in the upright position.Compared to standard hydraulic breakers, the drop hammer attachment generates little vibration or noise, meaning less wear on the machine and less noise for the operator and bystanders.Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.