Bobcat FC200

BOBCAT FLAIL CUTTER ATTACHMENT — FC200FLAIL CUTTER ATTACHMENT FOR COMPACT TRACK LOADERS, SKID-STEER LOADERS, TELEHANDLERS, AND TOOLCAT UTILITY WORK MACHINES• Clears brush and small trees while distributing cut materials evenly • Cutting width of 79 inches • Delivers excellent cutting, mulching, and mowing action of materials up to 3 inches in diameter • Thick steel deck design protects the attachment and provides maximum strength for tough clearing jobs • Excels in applications that include agriculture, landscaping, utility, and rental TOP TASKS• Clear brush and small trees • Cut, mulch, mow and spread a fine finish • Excels at cutting long grass HOW IT WORKSRather than rotate, the hammers cut vertically so that cut materials are thrown down on the ground rather than out to the side. This allows cut materials to be spread evenly for a finer finish. The flail cutter attachment can also be operated while traveling in either forward or reverse. FEATURESVARIABLE DISPLACEMENT MOTORThe variable displacement motor allows the flail cutter to be "tuned in" to the machine, depending on its hydraulic capacity. A control on the attachment, which connects to the motor, adjusts the hydraulic flow. This makes it possible to use the flail cutter with an assortment of carriers, a feature critical to the rental market. It can be utilized on machines with hydraulic flows ranging from 17 gpm to 40 gpm. ADJUSTABLE REAR GATEOpen or close the rear gate to vary the size of discharge material ranging from small, for mulching applications, to coarse, for high-performance cutting. AUTOMATIC BLADE SHUT-OFFWhen the flail cutter is raised off the ground this device stops flail rotation, preventing debris from being thrown towards the operator. FLOATING LINKAGE (STANDARD)Along with the compact deck length, the flotation linkage allows the flail cutter to float over ground contours, maintaining surface contact for optimal cutting performance. FULL-WIDTH ADJUSTABLE REAR ROLLERThe adjustable and tapered rear roller provides greater turning ability during operation, making it easier to maneuver the flail cutter in tight areas. SAFETY COMPLIANTThe flail cutter complies with the SAE J1001 standard for industrial flail mowers. THICK STEEL DECKDesigned with 1/4-inch steel, the deck is designed for maximum strength and durability. THREE CUTTING HEIGHTSOperators have three cutting-height options to manage a variety of terrains and brush types. HEAVY-DUTY FRONT RUBBER FLAPThe heavy-duty flap helps contain debris. ADDITIONAL DETAILSSide safety chains help contain debris within the housing that could be thrown during operation. The rotor brake stops the attachment in 7 seconds or less after hydraulics are deactivated.A rubber torsion disc absorbs impact loads that are encountered during operation. To protect the drive train, the flail mower features heavy-duty flanges on both sides of the rotor to protect the drive train from dust and debris. This also prevents wire from damaging the drive train mechanism.Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.