Land Pride FMP3760 Stalk Chopper / Flail Mower

LAND PRIDE - FMP3760 - FMP27/37 SERIES FLAIL MOWERSLand Pride’s familiar Parallel Arm Mower received a makeover and has been outfitted with a new mowing head. The FMP27 & FMP37 feature the parallel arm from our popular RCP27 & RCP37 with a Flail Head in place of the Rotary Cutter. The FMP is a good tool for mowing around ponds, over guardrails, or below grade while keeping the tractor on level ground and is easily attached and detached from the tractor’s Cat. 2 or 3 3-point hitch, freeing up the tractor for other uses. Contractors, municipalities, and landowners alike will benefit from the versatility of this unit!FEATURESINLINE FILTERCleans hydraulic fluid before it re-enters the reservoir.TWO PARKING STANDSEasy and level storage, easy connecting to tractor.OIL PRESSURE GAUGEEasily monitor oil pressure for optimum performance of unit.40 GALLON OIL RESERVOIRLarge reservoir maintains optimum fluid temperatures and also serves as counterweight.HAMMER BLADES2" Cutting capacity with hammer blades is ideal for trimming brush.INDEPENDENT CONTROL OPTIONSelf contained hydraulic system eliminates the tractor/FMP hydraulic incompatibility. This option uses the FMP hydraulic system to operate the mower.11'1" TRANSPORT WIDTHFolds up close to the tractor. No weight brackets or decks hanging away from the tractor. Typically, not much wider than the tractor, which means safer transporting.ADDITIONAL FEATURES AND BENEFITSTRACTOR HP RANGE FMP(M)2760 / FMP(M)3760 • Designed for 75 minimum hp (56 kW) tractor with minimum weight of 8,000 lbs (3629 kg)• Designed for 95 minimum hp (71 kW) tractor with minimum weight of 12,000 lbs (5443 kg)3 POINT DESIGN Does not tie up a tractor. Three point is easy to connect and disconnect from tractor.MOWER DECK VISIBILITYVisibility of the mower deck is captured from the operator’s seat. Easy to see operation. Operator does not have to look behind. FACTORY ASSEMBLED Arrives ready for the customer, saves time and money. EASY GREASING All grease zerks are easily accessible for servicing.PARALLEL ARM DESIGN Three cylinders used in a parallel arm design allows any cylinder to be adjusted without changing the position of the others. Means less positioning.LONG HORIZONTAL REACH - FMP(M)2760 = 15'-6" (4.72 M); FMP(M)3760 = 18'-10" (5.74 M)• Good access for reaching vegetation far away from the tractor.• Better access for reaching vegetation far away from the tractor.ABOVE GRADE VERTICAL REACH - FMP(M)2760 = 11'-5" (3.47 M); FMP(M)3760 = 13'-5" (4.08 M)• Good access for reaching up embankments and cutting low over-hanging limbs.• Better access for reaching up embankments and cutting low over-hanging limbs.BELOW GRADE REACH - FMP(M)2760 = 9'-1" (2.76 M); FMP(M)3760 = 11'-0" (3.35 M)• Good access for reaching down embankments.• Better access for reaching down embankments.180 DEGREE OPERATING TILT ARC Mower deck can be positioned to reach different angles.CAT. 2 & 3; 540 OR 1000 RPMFits a wide variety of tractors.HIGH BLADE TIP SPEED High blade tip speed means cleaner cuttingSHUT-OFF VALVE Permits maintenance with minimum oil loss.HYDRAULIC BREAKAWAY Allows the parallel arms to pivot backwards to avoid obstacles and to protect mower deck and parallel arms. Parallel arms are pivoted back to normal operating position with the hydraulic breakaway cylinder.KUBOTA 3-POINT STABILIZER KIT Makes the FMP2760 Parallel Arm Flail Mower a match fit for Kubota tractor model numbers M126GX, M135GX, and M6-141.SLOW MOVING VEHICLE MOUNTING SOCKET (STANDARD); SLOW MOVING VEHICLE SIGN (ACCESSORY)Mounting socket receives most slow moving vehicle signs equipped with a mounting blade for ease of attachment and removal when transporting on a truck or trailer. Slow moving vehicle sign is offered as an accessory when the tractor’s slow moving vehicle sign and mounting blade does not fit the mower’s standard mounting socketSimilar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.