Land Pride RCM5014 Rotary Mower

RCM5014 — OFFSET FOLDING ROTARY CUTTER Land Pride's RC5014 / RCM5014-- Land Pride's largest offset folding rotary cutter -- makes quick work of roadsides 14-feet at a time. The offset allows the operator to travel next to the roadway in the same direction of travel as the traffic, increasing safety for the operator. The cutter features a heavy-duty Cat 6 driveline, heavy duty gearboxes, and a high blade tip speed for a clean, uniform cut in most highway mowing operations.RC5014 & RCM5014 FEATURES AND BENFITS• Surpassed industry safety standards — All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ISO & ASABE.• Factory assembled — Saves customer set-up time and money.• Fully welded top deck — Fully welded deck adds strength.• 7 Year gearbox warranty — Shows confidence in our gearboxes. Years 6 & 7 Parts Only• 250 hp (168.4 kw) divider gearbox and 225 hp (167.8 kw) spindle gearboxes — Rugged heavy built gearboxes capable of handling heavy cutting applications.• Gearbox seal protection — Gearbox bottom seal protection for longer bearing life.• Input driveline: Cat. 6 CV — Holds up to shock loads and harsh mowing conditions. Fits wide range of tractors including high horsepower tractors.• Star profile drivelines — Star profile spreads load out to many points on the shaft. More apt to resist bending and twisting under shock loads and harsh mowing conditions.• Easy greaseable drivelines — Drivelines have access holes for greasing the U-joints and to grease the inner profiles.• 4 Plate slip-clutch — Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.• High blade tip speed —o 540 rpm: Center: 17,377 fpm (88.3 mps), Wings: 17,329 fpm (88 mps)o 1000 rpm: Center: 18,165 fpm (92.3 mps), Wings: 18,317 fpm (93.1 mps)o Allows for a clean cut of material and even distribution.• 6" (15.2 cm) Blade overlap — Generous blade overlap eliminates skipping, especially in turns.• High cutting capacity — Can cut brushy areas with saplings up to 3" (7.6 cm).• 10 1/2" (26.7 cm) Deck height — Handles heavy cutting, which reduces balling-up of cut material under the deck.• 3/16" (5 mm) stump jumper (optional) backed with a 1" (1.5 cm) thick mounting bar — Heavy round stump jumper with bottom gearbox seal protector. Can hold up to tough conditions.• 10 gauge (3.4 mm) double deck — Heavy enough to handle conditions but not weigh unit down.• Self-leveling pull-type hitch (optional) — Reduces drawbar wear by keeping hitch level while going through ditches.• LED Signal lights — LED lights are bright, long lasting, and resistant to vibration, unlike incandescent counterparts.• Hinged wing section — Allow cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.• 1" (2.5 cm) Solid hinge rods — Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself.• Wing transport lock — Safety feature. Holds wing up in case of hydraulic pressure loss.• 1" (2.5 cm) Enclosed front to rear dual leveling rods — Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.• Drain holes in wheel rims — Allows water to drain from wheels mounted on the folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims.• 5" (12.7 cm) Square rear axle tubing — Heavy axle to handle harsh conditions.• Spring-cushioned center-axle — Protects unit from bumps and ground shock.• Replaceable wheel spindles — Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove two bolts to replace damaged spindle.• Bar-tite hitch (optional) — Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.• Wheel options —o Laminated tires: Eliminates flats.o Airplane tires without foam filling: Give better cushion while transporting.o Airplane tires with foam filling: Give better cushion while transporting and can’t go flat.• Deck rings (optional) — 1/2" (13 mm) x 3" (7.6 mm) Welded deck ring keeps blades from damaging the deck.GEARBOX WARRANTY7 Year Limited Gearbox Warranty shows confidence in gearbox integrity. (Years 6 & 7 parts only.)3" CUTTING CAPACITYThese cutters offer 3" cutting capacity. See Operator's Manual for more information.OPTIONAL LP PERFORMANCE HITCHClevis swivels two ways: Cutter can swivel clockwise and counterclockwise about tractor drawbar up to 12° in either direction.ADJUSTABLE JACK ANGLEHelps keep park jack vertical when in use.LED SIGNAL LIGHTSLED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.BEVELED SKID SHOESWing skid shoes are flanged up along length of outside edge. This allows operator to turn without leading edge of wing skid shoes digging into the ground.1" SOLID HINGE RODS1" Solid hinge rods and greaseable cast wing hinges provide years of dependable service.CHOICE OF TIRESChoice of used aircraft tires, with or without foam, or laminated tires.Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.