Multiquip ST2037 Pump

MULTIQUIP ST2037—SUBMERSIBLE PUMPThis lightweight, compact submersible centrifugal pump is ideal for moving water in multiple confined and open area applications. This is a powerful, versatile, low maintenance pump that is perfect for a wide range of operations supporting Contractors, Service Utilities, Municipalities, and Homeowners. Further, the ST2037 incorporates a rugged cast aluminum housing, internal thermal overload protection, dual shaft seals, sealed ball bearings impeller and molded 25’ Power Cable with strain relief. Model ST2037F is available that provides a tethered industrial mechanical float switch assembly.FEATURES• 1.0HP, 115V/9.8A, 1Ø, UL & CUL Listed Electric Motor.• Built-in Overload Protection.• 2” (NPT) Female Discharge Port.• Reliable double mechanical oil-filled seals.• Cast iron/steel motor casing serves as heat conductor.• Pumps Liquid Up To 120° F.• 25’ of molded power cord w/strain relief• Dewaters Flat Surfaces Up To 1/2” Levels.OPTIONAL ACCESSORIESFLOAT SWITCH ~ SW1AMechanically activated, wide-angle design single ON/OFF float switch that is not sensitive to rotation or turbulence. A 120V “piggy-back” plug provides convenient operational set-up. For all Multiquip submersible single phase, 115V Pumps, and other comparable pump models.SW1A FEATURES• 120/230V 50/60Hz Single Phase• Rated for 13A running and 85A start-up.• Adjustable activation range 6” to 18”.• High impact PVC, corrosion resistant float housing.• Operates up to 140° F.• Heavy duty electrical contacts.• UL/CL Listed.• Passed NSF Standard 61 Protocol.• 16 gauge, 2-conductor water resistant cable - 20’ cord length.• Includes standard mounting cable & pipe clamps.CONTROL BOX ~ CB3120V 50/60 Hz Single Phase Controller w/two mechanically activated wide angle ON/OFF float switches (SW1WOPA). This box is selected if the operations call for a manual ON/OFF/AUTO Switch. Housing manufactured from polyester reinforced fiberglass, water resistant, UL/CSA Certified. Use with any 115V or 120V model submersible pump. For all Multiquip submersible single phase, 115V Pumps, and other comparable pump models.DOUBLE FLOAT SWITCH ~ SW2AConsists of two mechanically activated wide-angle ON/OFF float switches and a splice tube. The slice tube contains a Holding Relay which enables the floats to function in series. It is well suited for confined applications requiring an accurate pumping range. A Holding Relay eliminates pump chatter in turbulent water conditions. (Deactivation point @ 4” below mounting – Activation point @ 4” above mounting).SW2A FEATURES• 120/230V 50/60Hz Single Phase• Rated for 13A running and 78A start-up.• Adjustable activation range 2” to 48”.• High impact PP, corrosion resistant float housing.• Operates up to 140° F.• Heavy duty electrical contacts.• UL/CSA Certified.• Passed NSF Standard 61 Protocol.• Cable attached to Float Housings: 16 gauge, 2-conductor water resistant• Cable above Splice: 14 gauge 3 conductor w/‘piggy-back’ 120V plug w/20’ cord Length.• Includes standard mounting cable & pipe clamps.DISCHARGE HOSE – NPT THREAD• HD250 - (50’ L 2” Diameter)DISCHARGE HOSE – QUICK DISCONNECT COUPLERS• HDQ250 - (50’ L 2” Diameter)Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.