Seppi L7 FLEX 225 Stalk Chopper / Flail Mower

SEPPI L7 FLEX 225―OFFSETTING MULCHERSSIDE MULCHER WITH PARALLELOGRAM OFFSET UP TO 96 CM PLUS TILTL7 flex is a professional offsetting mulcher for roadsides, riverbanks, canals and ditches and mulches grass and scrub up to 7 cm in diameter, even with high vegetation. With the hydraulic side shift, it works up to 96 cm to the right of the tractor track. The mulcher tilts down to 65° and up to 90°. FLEX-SAFE protects against damage and the SPACE LINK attachment ensures optimum ground adaptation. The HELIX ROTOR with SEPPI flails guarantees maximum performance with low power requirements. Robust S420 steel and replaceable wear plates make the L7 flex particularly durable.APPLICATIONS• Maintenance of roadsides, riverbanks, canals, and ditches• Mulching of embankments and slopes• Landscape maintenance• Municipal maintenance• Reclamation• Nature conservation and re-naturalization• Landscape maintenance & green space managementQUALITY CHARACTERISTICS• The four bearings mounted on the roller act in all directions, thereby stabilizing the machine. This enables it to withstand loads and easily handle curves and work on slopes. A long service life of the roller bearings is guaranteed, even under demanding conditions.• What many people don’t know is that the actual mulching work in a mulcher is done by the counter cutters. Depending on the model and application, more or fewer counter cutters are installed in the chassis and sometimes also under the hood, always with a view to optimum mulching and optimum power requirements. COUNTER CUTTERS from SEPPI M. are made of drop-forged steel; They are shaped in such a way that they perform very well in mulching and also have a very long service life.• FLEX-SAFE is a system that protects mulchers from damage caused by collisions with obstacles such as stones or tree stumps. It allows the SMO avs, L7 flex, or L9 flex offsetting mulchers to move out of the way flexibly. This prevents overload. Working at high speeds is possible without compromising safety.• Most SEPPI M. mulchers have had this feature since the beginning. The logo identifies machines with spiral-arranged tools or hammers on the rotor shaft. This results in impressively smooth running, low power requirements, reduced noise, and, last but not least, top-quality results.• The symbol S420 indicates that the main components of the machine are made of a special steel. This steel is particularly tough and resistant to fatigue, which can occur during heavy-duty use, even in the area of weld seams. This high-strength steel is often used in combination with wear inserts.• The spatially movable pull bar, named SPACELINK by Seppi M., supports the weight of the machines on the mounting frame and thus carries them gently over rough terrain. In conjunction with the FLEX-SAFE collision protection, the SPACELINK bar lifts the implement over obstacles in the event of a collision.STANDARD VERSION AND CHARACTERISTICS• Mulches grass and brush up to 7 cm [2.”] Ø• Working speed 3-10 km/h• 3 point linkage cat. 2• FLEX-SAFE anti-collision system• 540 rpm gearbox• Belt transmission• Hydraulic side shift 99 cm [39”] to the right• Hydraulic inclination from +90° to -65°• Support roller under the base unit, adjustable roller under the mulcher• Front protection with chains• Rear protection with rubber• Triple helical rotor with flails• 2 rows of tempered counter cutters• ChevronsOPTIONAL CONFIGURATION AND ACCESSORIES• PTO drive shaft with double wide angle• 750 or 1000 rpm gearbox• Roller scraper• Additional front rubber flap• Rear lamp kitREQUIRED HYDRAULIC FITTINGS• 3 double actingSimilar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.