Seppi SMWA REV CF 155 Stalk Chopper / Flail Mower

SEPPI SMWA REV CF 155―FLAIL MULCHERSREVERSIBLE FLAIL MULCHER MULCHES GRASS AND PRUNINGS UP TO 5 CM ØThe compact SMWA rev cf mulcher is ideal for orchards, vineyards and professional landscaping. The SMWA rev cf mulches grass, prunings and shrubs up to 5 cm in diameter. Available in working widths from 115 to 225 cm, it can be mounted at the front or rear of the tractor thanks to the reversible three-point hitch. The HELIX rotor with hardened SMW flails and integrated counter cutters ensures consistent cutting quality. The degree of shredding can be determined by adjusting the rear M-FLAP ejection hood. The chassis made of high-strength S420 steel ensures durability.APPLICATIONS• Maintenance of orchards and vineyards• Mulching of vine and tree pruning• Weed control between rows• Mulching of grass and weeds• Landscape maintenance• Maintenance of roadsides and verges• Mowing of meadows and pasturesQUALITY CHARACTERISTICS• The four bearings mounted on the roller act in all directions, thereby stabilizing the machine. This enables it to withstand loads and easily handle curves and work on slopes. A long service life of the roller bearings is guaranteed, even under demanding conditions.• What many people don’t know is that the actual mulching work in a mulcher is done by the counter cutters. Depending on the model and application, more or fewer counter cutters are installed in the chassis and sometimes also under the hood, always with a view to optimum mulching and optimum power requirements. COUNTER CUTTERS from SEPPI M. are made of drop-forged steel; They are shaped in such a way that they perform very well in mulching and also have a very long service life.• Mulchers with a double mounting frame can be driven both at the front and at the rear, as indicated by the FR logo. A wide variety of combinations are possible: pushed at the front, pulled at the rear or even pushed at the rear.• Most SEPPI M. mulchers have had this feature since the beginning. The logo identifies machines with spiral-arranged tools or hammers on the rotor shaft. This results in impressively smooth running, low power requirements, reduced noise, and, last but not least, top-quality results.• This is the adjustable hood on the rear discharge opening of a flail mower. With the variably and continuously adjustable mulching flap, the discharge opening can always be adjusted to achieve optimum working results while at the same time minimizing power consumption.• The symbol S420 indicates that the main components of the machine are made of a special steel. This steel is particularly tough and resistant to fatigue, which can occur during heavy-duty use, even in the area of weld seams. This high-strength steel is often used in combination with wear inserts.STANDARD VERSION AND CHARACTERISTICS• Mulches grass and brush up to 5 cm [2”] Ø• Working speed 3-10 km/h• 3 point linkage cat. 1&2 reversible• Side shift with 2 positions: central and 17 cm [6.7”] to the right• 540 rpm gearbox with freewheel and through shaft• Belt transmission• Adjustable rear hood with rubber protection• Front protection with metal flaps• Support roller 152 mm Ø• Standard rotor with SMW flailsOPTIONAL CONFIGURATION AND ACCESSORIES• Rotor with Y flails• 750 or 1000 rpm gearbox• Gearbox with automatic inverter and double freewheel• Additional 3-point linkage• Front attachment• Hood with rakes• Metal front wheels• Front protection with chains instead of metal flaps• Additional front rubber flap• Roller scraper• Attachments for undercanopy maintenanceSimilar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.