Wilger ORS TO ORS CHECK VALVE Chemical Applicator Attachment

WILGER — O-RING SEAL (ORS) TO ORS CHECK VALVESORS manifolds & components are a simple, compact way of splitting and metering flow lines for any size of application equipment. All O-ring seals are Buna-N by standard. VITON® O-rings are also available.O-RING SEAL (ORS) CHECK VALVE BODIESWilger makes two styles of check valve body, with 4 different shut-off options available for each.O-RING SEAL (ORS) TO ORS CHECK VALVES (AVAILABLE IN 90° AND STRAIGHT)An ORS male inlet with an ORS female port, allowing for an ORS metering orifice and ORS fitting to complete a manifold assembly.DIAPHRAGM CHECK VALVE & SHUT-OFF OPTIONS FOR ORS CHECK VALVE BODIESDIAPHRAGM CHECK VALVEAvailable in 4PSI, 10PSI (standard) and 15PSI versions. Fairprene diaphragms standard. VITON® diaphragms available.MANUAL ON/OFF CHECK VALVEWhen ‘ON’, it acts as a 10PSI* check valve. When ‘OFF’, it turns off the flow completely to that body (*4PSI/10PSI/15PSI options are available). Fairprene diaphragms standard. VITON® diaphragms available.AIR-OFF CHECK VALVEActs as a standard diaphragm check valve, but when an attached air line is charged, it will turn OFF the flow to that body. Fairprene diaphragms standard. VITON® diaphragms available.OPEN THREAD OPTIONSharing the same thread as all COMBO-RATE® modules, the open thread is compatible with PWM or other precision ag systems.PRO-TIP: ASSEMBLY Assembling dry ORS fittings can be tough. Lubricate them with a dab of liquid silicone for easy assembly.Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.